Showing posts with label creative process. Show all posts
Showing posts with label creative process. Show all posts

Monday, May 25, 2009

THE CREATIVE PROCESS #9 From Photo to Art II

"FIRE & ICE"
(Click on images for larger versions.)
       
 My series "The Creative Process" explains how a
particular piece of art or a group of works were created.
This post is, in part, a response to
Click on the link to add your own
creative endeavor, or see what others have posted.

The Photo
        Occasionally I submit photos to Sky Watch Fridays, so I have been paying attention to skies and taking photos of them for several months. One day when I was walking, my lower back was bothering me, so I stopped to lean back against a fence beside the walking trail.  In front of me were two trees with a beautiful sky between them. I snapped a few pictures.
        Now, when I walk on that trail, I always stop at that spot to take additional photos, planning to create a future post for Sky Watch Friday marking how the sky and the trees change through the seasons.
        One of the earlier photos I took was when the tree branches were still bare during the winter. 

The Process
        When I started to work with this photo, I wasn't sure where I was going with it. I just experimented a bit and ended up with something surprising. I had thought I might just enhance the blue sky and perhaps give it the look of a pastel drawing. 

        1. In Photoshop, I selected a branch with the magic wand, then chose "similar". In this way, I was able to select all of the branches and copy them to a separate layer.















        2. By selecting the branches and choosing "inverse" I was able to select everything except the branches (in this case, the sky) and put it on a separate layer.  I "turned off" the layer with the branches & allowed the white background layer to be visible in the holes where the branches would be.  I also played with the color balance and saturation on the sky.

        3. Simply to see how it would look, I inverted the color of the sky. It became an orange shade, which I again enhanced with more red and stronger saturation. By inverting the colors, the white of the clouds had also turned dark.  It reminded me of videos I have seen of massive fires, with the sly filled with billowing orange and black smoke.
            I liked this, the white tree branches looking like they were covered with snow or ice and the sky resembling fire. Immediately I thought of the title "Fire & Ice." At this point, the white branches were really still the white background layer showing through, but the plain white trees looked too flat to me.


        4. So I took the black tree outlines and made 2 more copies and changed one to white. I had three layers of black tree branches, plus one white.
     I placed a copy of the black tree branches on three separate layers over the orange sky and then placed the white tree branches on top.
            On each of the three layers with black branches, I nudged one slightly left, one slightly right and one slightly up, to make it look like black outlines around the white.

The image at the top of this post is my final completed "Fire & Ice"  Several years ago I created an abstract work called "Fire and Ice." Since I had used "and" in that one, I used an "&" in this one.



Variations
        As usual, I always have some other variations. These may have been steps along the way that I sort of liked, but rejected for the final product. However, because different people have different tastes, some may like these better than my final choice.


        Variation 1. I cloned parts of the trees to create a third tree in the middle. Also, I put the black over the white in this one.  My only objection to this is that most of the sky, which I think looks dramatic in my final pick, is hidden. I do like the black over the white, but because I liked the title "Fire & Ice" I thought the white over black worked better, creating more contrast between the hot orange and cold white.



        Variations 2 & 3: These are exactly like the one I chose except that I did not invert the sky colors. Instead, I enhanced the sky with some magenta (left) and cyan (right). 

        There are, of course, a zillion other possibilities of ways to modify, change, or enhance a digital photo with software.

(photos, art, and text ©2009, C.J. Peiffer)

Monday, April 6, 2009

THE CREATIVE PROCESS #7 - From Photo to Art







"CLASSIC CADDY"
('54 Coupe DeVille)
(©2006, C.J. Peiffer)

This image is, in part, a response to
and
Click on the link(s) to post your own response
to the challenge or to see what others have posted.

This post is the seventh in a series explaining how a
particular work of art or a group of works was created.

        I love to enhance my photographs so they look like pieces of art rather than photographs.
        I took this photo many years ago at Gast Classic Motorcars Exhibit (apparently no longer in business) in Strasburg, PA in the middle of Pennsylvania Dutch country.

        After scanning the photo print (I took the photo way before digital cameras) the first thing I did was digitally remove any specs of dust or other flaws from the photograph.

        Next I intensified the colors and increased the contrast between light and dark.





        After trying several other filters, to make it shinier, give it texture, change the colors, I decided to use the "glowing edges filter" which gives the image a black background with neon-like edges.         












        While this results in an effect that is interesting in itself, I didn't want the red color of the original automobile to be hidden, so I removed the black from the car, leaving the glowing edges.  
        I left the black in the background, but it looked too plain and flat, so I added a texture to it. Finally, I added a copyright and my name to the lower right corner.


        See products (T-shirts, mouse pad, card, tie, etc.) featuring this "CLASSIC CADDY" image at my Pro Artz Zazzle pages.

(text ©2009, C.J. Peiffer)

Sunday, April 5, 2009

THE CREATIVE PROCESS #6 - ART EGGshibit

"Hard Cooked"
"Sunny-Side-Up"
This post is in response to a challenge on
CREATIVE EVERY DAY Click on the link to add your own response to the
challenge or to view those submitted by others
This post is the sixth in a series explaining how a particular work of art or a group of works was created.         


When creating art, sometimes the most creative thing is not the actual completed art work, but the idea.
        Twenty or so years ago, the Pittsburgh Center for the Arts held an EGGshibit the month before Easter. Local artists were encouraged to use an EGG theme in any medium to submit for EGGshibition.

        At that time, I had been doing mostly fiber art: tapestry weaving, appliqué, quilting, crocheting, stitchery, batik, sometimes even spinning my own yarn from raw wool and using natural dyes (onion skins, lichens, acorns) to produce my own colors.
        The first year the exhibit was held, it took me a long time to come up with a unique way to use fiber with an egg theme.  I finally decided to use white and yellow yarn to crochet an egg in two pieces and stuff it, to make a soft sculpture that looks like a hard-cooked egg cut in half. I even created a crochet knife to "cut" the egg. "HARD COOKED" was displayed on straw in a dark area, so the photo isn't great, even with some enhancement. To give you an idea of the size of the sculpture, if the two pieces of the egg were placed together, the length of the egg would be about 10 inches, the diameter at its widest point about 6 inches. "HARD COOKED" didn't sell at the EGGshibit, but a few years later when my first husband (also an artist) and I were in the process of an amicable separation, he asked if he could have that piece in exchange for one of his paintings.
        After the first EGGshibit, I had an entire year to think up an idea for the next year. I decided to create a halter top and sun hat with fabric and call the set "SUNNY-SIDE UP." Everyone loved this set and I enjoyed seeing people point and laugh when they saw it at the opening reception of the EGGshibit. The piece sold and I often wondered if the buyer had the nerve to wear it in public or just liked it as a curiosity.

"Chicken Casserole with Egg Noodles"
        The following year, I created "CHICKEN CASSEROLE with EGG NOODLES." This piece was made from unbleached cotton cloth which I stuffed to make the chicken, chicks, and eggs. I used stitchery to sew on the details. I found some yellow feathers to poke from the cracks (which were also stitched) on the eggs. I made the noodles from pale off-white cloth and sewed twister seals inside them so I could bend them to look like noodles. I don't remember what happened to the "CHICKEN CASSEROLE."

        I'm not sure if the art center continued having EGGshibits, but around that time, I moved out of the city and eventually dropped my artist's membership there. 
        The Pittsburgh Center for the Arts is one of the treasures of Pittsburgh, a great place to see and buy unique work by local artists,  participate in classes, workshops, and lectures, attend openings of exhibits by individual artists or by member groups such as the Associated Artists of Pittsburgh (one of the longest, continuously running art organizations in the country), Weavers' Guild, Pittsburgh Society of Artists, Craftsmen's Guild, Pittsburgh Print Group, Pittsburgh Filmmakers, and other similar groups. 
        If you are in the area, stop in. 
(artwork, photos, and text ©2009, C.J. Peiffer)

Monday, March 16, 2009

THE CREATIVE PROCESS - #5 Realistic to Abstract







"Cabin Fever"
Versions 1 & 2
(©2009, C.J.Peiffer)









This post is the fifth in a series explaining how a
particular work of art or a group of works was created.

This post is in response to a challenge at
Click on the link to add your own response to the
challenge or to view those submitted by others

CHANGING A REALISTC IMAGE INTO AN ABSTRACT DESIGN

        There are many ways to create an abstract design. One can, of course, start with a clean canvas or sheet of paper and create something from nothing. Or one can start from a real object, then change it until it no longer looks like anything real.
        For this particular design, I started with a photograph and changed it in many steps using Photoshop.  I could have come up with something similar with paint and brush.


THE IDEA
        I was reading the previous day's mail over breakfast one day. On the table was a catalog for a cruise that I couldn't afford and which I intended to throw away. Later, when I returned to the table, I saw a photograph in the catalog up-side-down, and at first, thought it was an abstract painting.  I had been thinking about posting a "Creative Process" post about making abstract designs, so I thought I would use that photo to make a nonobjective abstract ---that is, a design in which there are no recognizable objects.
        In a nonobjective design, the viewer might imagine that a design resembles something, but the artist had no intention of creating a recognizable image.

THE PROCESS
        The first thing I did was copy and paste the photograph several times, turning it to show different points of view, overlapping the images on top of each other to fill the available space. What this does is it repeats shapes and colors, making the design look unified, yet because the shapes and colors are sideways or up-side down, the design achieves some variety to make it interesting.
 



       I liked the royal blues in the original photograph, so I selected anything that was that blue shade, copied and and pasted it on top of the photo arrangement.


        I also saturated the colors, made them more intense.
       




        Then I tried to make the design look like it was no longer a photo by using filters to make parts look like cut out pieces of paper and giving it the appearance of rough pastels. Even after doing some of this, the fruit basket was still recognizable, so I blurred those parts.




        Next, I lightened some of the colors, created more contrast, and then saturated them even more than I had done before. 






       I thought the design needed more contrast, so I chose parts that were a dark brown and made them black. Then I chose some parts that were olive green and made them a brighter shade of dark green.




THE TIME
  This sounds like it took only a few short steps, but I experimented with many different changes, often rejecting them and trying something else. With Photoshop, one can add things to new layers, or copy a layer and try a certain effect. If I don't like what I  tried, I can undo it, or I can delete that layer and try something else. It probably took me about 2 hours to decide what I liked and didn't like before I settled on my final design.

VARIATIONS
        At this point, I liked the design, but I wanted to try some other possibilities, so I took the resulting design (a larger version is at the very top left of this post) and chose to invert the colors. That meant that black became white, red became light blue, royal blue became yellow. I sort of liked the result, but it seemed pale and washed out. 
  I chose all the white parts and made them black again. I didn't like the yellow, so I changed it to magenta and I made the orange parts green.


        Now I had two versions of the same design in two different color combinations. (See very top of post.) I could, of course, create many more different variations, if I chose to do so.

        If one looks at the original photograph and the final designs side-by-side, one can still see some similarities. But without the original photo, I doubt that anyone would recognize or guess what was in the original photo. 

        When I taught school, before we had computers, I had my 8th grade students draw an ordinary object, such as a pencil sharpener, a book, or a a bottle of paint. Then using carbon paper, they copied the shapes and lines several times, each time distorting the object a little. One can achieve the same results by tracing on another piece of paper while holding it on top of a drawing with the help of a light table or a window.  On the fifth or sixth change, students used colored pencils to color the result in bright colors that had nothing to do with the original object.  They were metamorphosing the objects from a realistic line drawing to a nonobjective abstract in several steps.

THE TITLE
        Although the original photo has been changed so much, no one would recognize it, it was originally the image of a ship's cabin, so I called my design "Cabin Fever." 

(©2009, C.J. Peiffer)

Thursday, February 19, 2009

THE CREATIVE PROCESS - #4 MAKING SNOWFLAKES

EVERY SNOWFLAKE IS UNQIUE, JUST LIKE YOU.
This is a post (partially) in response to "A Thousand Word Thursday"
and
Click on the link(s) to add your own response to the
challenge(s) or to view those submitted by others

I just discovered a website called SNOWDAYS where you can design your own unique snowflakes. The image above includes a few of my own efforts. If you want to create your own, click on the link and follow my instructions. SNOWDAYS is a little slow loading, so be patient.

HOW TO CREATE A SNOWFLAKE on the website:

1. Click on CREATE YOUR OWN SNOWFLAKE. It will show a virtual paper folded to create a six-sided flake.

2. Using your mouse, cut shapes into the edges, along the folds, and holes in the middle.
If you don't like what you have done, you can go back by clicking UNDO once or multiple times or you can start over by clicking RESET.

3. When you are happy with your result, choose DONE.

4. It will ask you to enter your name and other info. (I think you only need to enter a name and it can be a nickname.) Then click ADD.

5. It will then ask if you want to email it to anyone. If so, you can enter email addresses. Choose NO THANKS or SEND.

6. Wait until you see your snowflake fall from the sky on the animated picture. (Remember it moves slowly.) It will have an arrow that says YOURS.

7. Click on your snowflake. It will give you several choices for printing it. For example, you can print a greeting card or a single large flake. Your print will include the catalog number of the snowflake. If you keep a copy, you can retrieve it easily with that number, although you can use your name, too.

8. You may print other people's snowflakes, too. On the animated picture showing snow falling, there are large snowflakes floating down the page, but even the ones that look like dots are snowflakes that you can "catch" with a click of your mouse, then print.

SUGGESTIONS FOR SUCCESSFUL SNOWFLAKE DESIGNS:

CUTTING: If you are cutting a shape from the edge or on a fold, make sure you start and end your cut with your mouse outside of where the full sheet of folded paper would be. I found when I didn't do this, I often had little pieces of white that were floating outside of the rest of the design and sometimes it was difficult to eliminate them. You can always UNDO back several steps until you get to the step before that happened.

MAKING UNIFIED DESIGNS: You can start hacking away, removing any kind of shapes you wish ---and you may end up with a wonderful design that way. However, I suggest that a good way to unify your design is to make shapes that repeat a line or curve similar to one next to it.

On the example below, Notice that lines in the same color seem to repeat lines above, below or beside that one.

(You might also notice that when this section of snowflake is greatly enlarged, the lines aren't as smooth as they appear when smaller.)

GIVING YOUR DESIGN VARIETY:
I don't want my snowflakes to look the same all over. If every shape I cut were a circle or a diamond shape, the final design would lack interest. You might decide to make all your pieces curved in one snowflake or with straight lines and pointy edges in another to give it unity, and still make each cut a unique shape.

Another thing you can do, is, make the top of a shape curved (for example) and the bottom zig-ziggy. Then make the shape next to the zig-zag repeat that zig-zag and make the bottom of the next shape sort of squarish. The next shape might be squarish at the top next to the other squarish line and curvy at the bottom, and so on.

Another way to add variety, is to make the distances between the cut shapes vary, so there will be more white space in some areas and less in others. At the example at the top of this page, the snowflake at the lower right was done with small areas between cuts toward the center and larger spaces toward the outside edges.

SIMPLE OR INTRICATE DESIGNS: You can make designs as simple or as intricate as you wish, but the system may eventually tell you that you have reached your creative limit. At that point you can UNDO, RESET or decide that you are DONE.

MAKING A COLORFUL PRINT: The backgrounds on the printouts are gray, so they aren't all that pretty. After printing each of mine, I scanned it. Then, in Phtotoshop, I chose just the white flake, copied and pasted it onto a blue background.

THE IMAGE ABOVE: The image at the top of this page includes my first three snowflake designs created on SNOWDAYS (the 3 large flakes) plus numerous copies of the same three flakes which I scaled to smaller sizes.

MAKING SNOWFLAKES WITH CHILDREN:
I'm sure this would be fun for kids, but it does take some skill to control the mouse, so it probably won't work well for children under 9 or 10 unless they have excellent mouse skills. With younger children, you could ask them where they wanted you to place a circle, triangle, diamond, square, curve or zig-zag ---so they can help you create a snowflake and also learn the names of shapes.

MAKING A REAL PAPER CUTOUT:

You can, of course, do this with real paper. I recommend paper no thicker than printer paper. Construction paper is normally too thick. White butcher paper works well.

Start with a square ---I recommend at least 8 inches. Even though snowflakes are six-sided, the easiest thing to do is fold the paper in half three times. This will result in an eight-sided flake. Use a compass with the point at the pointed end of the folded paper, to draw a curve on the outside edge. Cut it along that line.

Now start cutting just as you would on the website. Use sharp scissors. If you want very intricate or lacy effects manicure scissors work well. When cutting where there are no folds or edges, you can either use an Exacto knife (with cardboard underneath to protect your work area) or you can make more folds anywhere, but be careful you are not cutting through to other openings. (Look at both the front & back to see previous cuts.)

Another possibility, is to draw your design with pencil before cutting. Instead of attempting to erase the pencil lines on the delicate snowflake, turn the paper to the clean side.

You can paste the snowflake on colored paper.

At the left is an example of one of my hand-cut snowflakes.





(©2009 C.J. Peiffer)

You may make copies of this post (with attribution) for EDUCATIONAL purposes only.

Saturday, January 3, 2009

THE CREATIVE PROCESS - #2 PARODY

"THE MAKEOVER"  is one of my favorite digital pieces and is also a crowd-pleaser when exhibited. 




This post is in response to a prompt at




Click on the link to add your own response to the
challenge or to view those submitted by others

        This post is the second in a series that features the CREATIVE PROCESS for a particular piece of art or a group of works. These posts will explain some or all of the following: how I conceived the idea, how I created the piece, how I decided on the title, and unique parts of the creative process for this particular piece.

Below, you will find the step-by-step process I used to create this image.

The Idea
        I found an old reproduction of the Mona Lisa and posted it near my computer where I was working on 50 pieces of digital art for an upcoming solo exhibit. Sometimes when my eyes were tired of the monitor, I would look at Mona wondering if she were considered beautiful in her time. One day, I thought she wouldn't look bad with a bit of makeup, some brighter clothes, and a new hairdo to replace her plastered-down do. Thus the idea to create a makeover was born, along with my apologies to Leonardo.

The Title
        "The Makeover" was the obvious title for Mona's drastic remake.

The Time
        People often ask how long it takes to create a work of art. The real answer is “all of my life” because creating art requires everything I've learned since I first held a crayon.
        “The Makeover” consumed approximately 40 hours. Much of my work isn’t visible because the layering process allowed me to experiment. New elements were added on layers, almost as if they had been painted on transparencies, one on top of another. I was able to add a new layer between layers or delete or change any layer without disturbing the others.
        When I scanned the reproduction, the result retained the textured appearance of the original paper and made it look rather old, qualities I didn't expect, but liked. Then I started to work on the 'After' portion of my piece.
        I created the initial image in about 25 hours. For several weeks, I returned to it every day, each time finding something to improve. Later, I enlarged it on the monitor to 300% of its actual size to add miniscule details and corrections, one tiny enlarged section at a time.

The Process - The Making of  "THE  MAKEOVER"


BEFORE

    1. & 2. Because my reproduction of the “Mona Lisa” was so large, I had to scan it in two parts.
    3. a. I joined the two scanned pieces together.
        b. I touched up the initial image so that the area where the two pieces met was no longer visible.
        c. The cream-colored border was eliminated.
        d. Colors were adjusted.
        e. The entire image was lightened.
        f. The “Before” text was added twice, once in yellow and once in black. The two were then overlapped.




AFTER
    4. a. I began the “makeover” portion by touching up facial flaws including adding “concealer” to hide the bags under the eyes.
        b. The neckline of the dress was lowered.
        c. Skin had to be painted in place of the dress when the neckline changed.

    5. Mona’s face and neck were lightened and smoothed and a transparent section of this lightened image was placed over image #4 to create the appearance of foundation makeup.
    6. Then, her hands were too dark for her face, so they were lightened similarly.

    7. The robe was selected, copied and the colors changed. These are the two darkest shades created for the appearance of folds and shadows.
    8. a. Lighter shades and highlights of her robe were created.
        b. I added a texture to the clothing to make it more like the original reproduction which had been printed on textured paper.
        c. Light shadows were added to emphasize her cleavage. Later, shadows were added to this same layer for her new hairdo.

    9. a. Mona received a pair of green contact lenses, painted on a transparent layer so that the characteristics of her real eyes would show through.
        b. Eye shadow was added on three different layers, then joined and blended.
        c. Three different shades of lipstick were applied in transparent layers.
        d. I added two shades of blush to her checks, the tips of her nose and chin, her forehead and her neck.
    10. To give her lips a fuller appearance, I added highlights to her lower lip.
    11. a. Unfortunately for Mona Lisa, the fashion of her day was to shave the eyebrows. I drew on eyebrows, one hair at a time, using several shades of brown.
          b. Similarly, she received eyelashes and eyeliner.
    12. a. Outlines of the irises were darkened.
          b. Whites of the eyes were lightened to eliminate their bloodshot appearance.
          c. White dots were added to the eyes for highlights.

    13. I gave Mona a manicure by adding two shades of pink in transparent layers.
    14. a. I searched magazines and catalogs, finally settling on several photographs from which I might harvest a hair style.
          b. I scanned a catalog image with the new hairdo, then eliminated the face and as much of the background from the catalog image as possible.
          c. I overlapped the hair over Mona’s face. It didn’t fit exactly, so I enlarged it, erased what hid her face, and “cloned” the curls to place more curls in areas that needed more hair.
          d. Finally, by enlarging the image on the monitor, the background from the catalog image could be eliminated from around and between the curls so that the image of DaVinci’s painted background could show through.

    15. a. The hair was highlighted by selecting the lightest strands from image #14, lightening it, making it slightly transparent, then pasting it over the previous image.
          b. Earrings were drawn in pink with white highlights.
          c. I made final touch-ups on all parts of the image.
          d. The “After” text was added in two layers (yellow and black) and overlapped.

    Finally the “Before” and “After” images were placed side-by-side.

(Art work and text ©2002 C.J. Peiffer)
Products featuring "The Makeover" image can be found HERE.

Tuesday, December 30, 2008

THE CREATIVE PROCESS: #1 CREATIVE CROCHET


"Where Sky and Water Never Meet"
crochet and stitchery on unsized canvas
approx. 24" X 24"

This is the first of many posts that will feature the creative process for a particular piece of art or a group of works.  I will be explaining some or all of the following: how I conceived the idea, how I created the piece, how I decided on the title, and perhaps some other parts of the creative process, including how I resolved a problem. 

This post is in response to a prompt at


Click on the link to add your own response to the
challenge or to view those submitted by others

The Idea:  
        I had been creating fiber arts for many years. I worked on a 4-harness loom and created tapestries on a huge frame loom. I used batik, patchwork, stitchery, and macramé. Sometimes I even spun my own wool yarns and dyed them with natural dyes such as onion skins and lichens.
        At a fiber arts exhibit, I saw two great crocheted works. One was a sculpture of a bull dog made from stuffed crochet pieces. The other was a crochet box that had been "bronzed' the way parents used to have baby shoes electroplated. 
        When I was young, my grandmother, or maybe my mother, taught me how to crochet a lacy edge on a handkerchief, but that was as far as I had gone with crochet. However, it seemed like a medium that would be great for creating unique fiber pieces. 
        I took an evening crochet class to learn basic stitches. I followed some patterns just so I knew what I was doing, but I never used patterns thereafter. I created crocheted pieces to add to tapestries, unusual crocheted wall hangings, and unique clothing.

The Process:
        For "Where Sky and Water Never Meet" I stretched unsized, unbleached canvas on a frame.  On the back, I lightly drew a circle with pencil. Then, I started to make crocheted pieces from unbleached cotton thread. As I completed pieces, I stitched them onto the canvas, keeping them wavy, but somewhat horizontal and within the circle. I left a blank area purely for design purposes.  
        As I progressed, if an area seemed blank, I would create a new piece. Or if one area seemed to have a higher relief , I would create a piece to balance it.
        After I completed all the crocheted pieces, I made additional designs on the canvas within the circle with stitchery.
        At that time, I was "into" white or neutral colors. Everything on this piece was an unbleached white. I liked the effect of only the textures and shadows creating the design.  I placed the completed piece in a silver metal frame that fit over the canvas stretchers.

The Title:
        I had been teaching art for many years. Most of the time, I taught grades 6, 7, or 8. Some of the younger students were still drawing pictures of the outdoors with an inch or two of sky at the top of the paper and the ground on the bottom with an open space between. I often walked students to a window to point out that the sky appears to be touching the ground. If they were drawing a seascape, the sky would appear to touch the ocean.
        This piece was round, like the earth. The crocheted pieces reminded me of clouds and ocean waves.  The open space between the top and the bottom sections of crochet and stitchery reminded me of children's drawings, therefore I named it "Where Sky and Water Never Meet." 

The Problem:
        "Where Sky and Water Never Meet" was shuffled from exhibit to exhibit, stored in different rooms in my house, made a move to another house, and was left in a dusty attic for a while.  The natural white had become a dingy gray with dirty spots that I couldn't remove.

The Fix:
        I mixed some strong blue dye and painted it on the top of the canvas, allowing it to run toward the bottom. I then turned the canvas unside down and did the same on the bottom, allowing the dye to run toward the top. With the canvas flat, I brushed dye on the crocheted parts and more on the canvas, leaving some areas undyed. With multiple applications of the dye in some places, I was able to create several shades of blue. I chose blue because the title indicated sky and ocean. Thus, I was able to keep the title yet give the work a new look. 
        I had liked the effect of white on white, but the blue dye added a depth to the piece that wasn't there before. And it looked even better when I reinserted it into its silver frame.


"Where Sky and Water Never Meet"
crochet, stitchery, and dye on unsized canvas
approx. 24" X 24"
(art work, photos, and text ©2008, C.J. Peiffer)

Find Products featuring this image HERE.